Dixell XWEB5000 Manual de usuario Pagina 6

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 8
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 5
CA
T NO.
XJR40D
4 Zone Lighting Controller
OVERVIEW
The Contr
ol shall have four status LED indicators corespondent to it’s four manual
key switched in addition to a Power indicator LED. The unit has 4 Digital Inputs
(voltage free open/Closed circuit) that can control each of the 4 8A relay
outputs. It shall have an RS485 Connection.
MOUNTING
The product is 4DIN RAIL or wall mounted in a DinBox and shall have IP65
protection from the front.
SENSOR
The product shall have up to 4 Digital Input sensors such as a photoelectric eye,
occupancy sensor or remote on/off or any other open or closed Digital signal.
POWER
The product shall be powered by 120Vac or 230Vac
INPUTS
The control shall have 4 Digital input (open/closed circuit) that is typically used
with photoelectric sensors for sunrise/sunset operation or occupancy sensors.
OUTPUTS
The XJR40D has 4 8A SPDT relay outputs.
COMMUNICATIONS
The Control shall have an RS485 Serial port. The two way communication
pr
otocol shall be MOD-BUS-RTU. The Module shall have a settable 4 serial
addr
ess’s from 1 to 247. MOD-BUS Comments, Registers and Hex Codes
ar
e fr
ee and open, ar
e available on r
equest.
PROGRAMMING
The control is pre-programmed and pre-addressed for 4 zone lighting. There
shall be 2 levels of control parameters that are password protected. A Hot
Key flash memor
y device can
upload or download a pr
ogram to the unit.
The program shall remain in internal memory without power.
WEISS INSTR
UMENTS,
INC., 905 WAVERLY AVE., HOLTSVILLE, NEW YORK 11742 631.207.1200 • FAX: 631.207.0900
www
.weissinstruments.com
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
WARRANTY
ONE YEAR
XJR40D
Vista de pagina 5
1 2 3 4 5 6 7 8

Comentarios a estos manuales

Sin comentarios